N3K-C3064TQ-10GT is the Nexus 3064-T, 48 10GBase-T and 4 QSFP+ ports. The Cisco Nexus 3064-X, 3064-T, and 3064-32T Switches are high-performance, high-density Ethernet switches that are part of the Cisco Nexus 3000 Series Switches portfolio. These compact one-rack-unit (1RU) form-factor 10 Gigabit Ethernet switches provide line-rate Layer 2 and 3 switching. They run the industry-leading Cisco? NX?OS Software operating system, providing customers with comprehensive features and functions that are widely deployed globally. They support both forward and reverse airflow schemes with AC and DC power inputs. The Cisco Nexus 3064 switches are well suited for data centers that require cost-effective, power-efficient, line-rate Layer 2 and 3 top-of-rack (ToR) switches.
N3K-C3064TQ-10GT Specification |
||
Physical | ● 1RU fixed form factor
● Cisco Nexus 3064-T: 64 x 10 Gigabit Ethernet ports (48 10GBASE-T and 4 QSFP+) ◦ 48 RJ-45 ports support 100 Mbps and 1 and 10 Gigabit Ethernet ◦ 4 QSFP ports support 4 x 10 Gigabit Ethernet or 40 Gigabit Ethernet each ● 2 redundant power supplies ● 1fan tray with redundant fans ● 1 I/O module with management, console, and USB flash memory ports |
|
Performance | ● 1.28-Tbps switching capacity
● Forwarding rate of 950 mpps ● Line-rate traffic throughput (both Layer 2 and 3) on all ports ● Configurable maximum transmission units (MTUs) of up to 9216 bytes (jumbo frames) |
|
Hardware tables and scalability | MAC addresses | 128,000 |
Number of VLANS | 4096 | |
Spanning-tree instances | ● Rapid Spanning Tree Protocol (RSTP): 512
● Multiple Spanning Tree (MST) Protocol: 64 |
|
ACL entries | ● 2000 ingress
● 1000 egress |
|
Routing table | ● 16,000 prefixes and 16,000 host entries
● 8000 multicast routes |
|
Number of EtherChannels | 64 (with vPC) | |
Number of ports per EtherChannel | 32 | |
Buffers | 9 MB shared | |
Boot flash memory | 2 GB | |
Power | Number of power supplies | 2
● Cisco 3064-T and 3064-32T: Redundant for AC power |
Power supply types | ● AC (forward and reversed airflow)
● DC (forward and reversed airflow) |
|
Typical operating power | ● CiscoNexus 3064-T
◦ 362W (48p with 3m cables; 4 SR4 at 100% load) |
|
AC PSUs
● Input voltage ● Frequency ● Efficiency |
● 100 to 240 VAC ● 50 to 60 Hz ● 89 to 91% at 220V |
|
DC PSUs
● Input voltage ● Maximum current ● Efficiency |
● -40 to -72 VDC ● 33A ● 85 to 88% |
|
Typical heat dissipation | ● Cisco Nexus 3064-T
◦ 1235 BTU/hr (48p with 3m cables; 4 SR4 at 100% load) |
|
Maximum heat dissipation | ● Cisco Nexus 3064-T: 1553 BTU/hr | |
Cooling | Forward and reversed airflow schemes:
● Forward airflow: Port-side exhaust (air enters through fan-tray and power supplies and exits through ports) ● Reversed airflow: Port-side intake (air enters through ports and exits through fan-tray and power supplies) Single fan tray with redundant fans Hot swappable (must swap within 1 min) |
|
Sound | Measured sound power (maximum)
● Fan speed: 40% duty cycle ● Fan speed: 60% duty cycle ● Fan speed: 100% duty cycle |
● 59.7 dBA ● 66.4 dBA ● 71.0 dBA |
Environment | Dimensions (height x width x depth) | ● Cisco Nexus 3064-T and 3064-32T: 1.72 x 17.3 x 22.45 in.(4.4 x 43.9 x 57.0 cm) |
Weight | ● Cisco Nexus 3064-T and 3064-32T: 20.8 lb (9.5 kg) | |
Operating temperature | 32 to 104°F (0 to 40°C) | |
Storage temperature | -40 to 158°F (-40 to 70°C) | |
Operating relative humidity | ● 10 to 85% noncondensing
● Up to 5 days at maximum (85%) humidity ● Recommend ASHRAE data center environment |
|
Storage relative humidity | 5 to 95% noncondensing | |
Altitude | 0 to 10,000 ft (0 to 3000m) |